If your house has many high-power appliances (such as multiple air conditioners, water pumps, and large-capacity refrigerators), and the daily power consumption is large, then the 10KW 15KW 20KW off grid solar power systems are prepared for this.
This series of off grid solar solutions can carry up to 20KW of electrical appliances, and the maximum power generation is 70KWH per day. Using the newly developed MPPT controller, the conversion efficiency of 99% is almost no waste of electricity from the solar panels.
At the same time, this hybrid solar energy system has a WIFI monitoring function, which can monitor the power generation status of the solar panel system through the mobile app at any time.
Rated DC96V/DC192V input, AC220V 1-phase output;
Frequency: 50 Hz +/- 0.5%
True sine-wave, off-grid type; LCD display of operating parameters;
Lithium Battery: Wall-mounted design、Easy installation、Smart Elite BMS
Lead-acid Battery: Deep cycle、Free Maintenance、Fully sealed
PV Array Combiner, Solar Panel Rack, Cables
- Wide range of DC input voltage
- IP65 guard level, suitable for outdoor
- Reliable thunderstorm & surge protection
Type: Half-cell Monocrystalline PV Module
Max Power: 450W/550W
25 years power output guarantee
The system is specially designed for high-power electrical appliances to ensure stable operation when the electrical appliances are turned on
at the same time.
Solar panels use cells with a conversion efficiency of up to 22%. The same number of solar panels will generate more power.
It provides two options of both lead-acid/gel batteries and lithium batteries, which can be chosen based on the system budget and using conditions flexibly.
The optional WIFI monitoring module can monitor the power generation and operation of the system through the mobile phone APP.
Average daily generation
Rated Loads Capacity
16pcs 12V250AH gel battery /
2pcs-48V200AH LifePo4 Battery
16pcs 12V250AH Gel battery
32pcs 12V200AH Gel battery
PV Array Combiner
Solar Panel Rack
Roof-type mounting rack including complete fittings, aluminum alloy (Rack can be customized per request)
Solar power system accessories are on mass production. Our company strictly follows the international standards for solar products production and carries out a detailed division of labor for the assembly process of each accessory to ensure that each process has quality inspections. The final product will also undergo at least 48 hours of continuous aging to ensure that every solar component can meet the client's requirements.
The amount of space required for a 10 kW solar system can vary depending on the type and efficiency of the solar panels, as well as the mounting system used for installation. Anern 10kw solar power system need around 20pieces of 450w half cut cell monocrystalline pv module, each with an area of around 2.9 square meters, for a total area of 41.8 square meters. This is just an estimate and the actual size can vary depending on the specific factors mentioned above.
The size of a 20 kW solar system can vary depending on the efficiency of the solar panels and the amount of space available for installation. Anern 20kw solar power system need around 27pieces of 550w half cut cell monocrystalline pv module, each with an area of around 2.42 square meters, for a total area of 65.34 square meters. The actual size may also depend on factors such as the type of mounting system used and the layout of the solar panels.
The amount of electricity produced by a 20 kW solar system can vary depending on various factors, such as the location, weather conditions, and the efficiency of the solar panels. However, as a rough estimate, a 20 kW solar system can produce around 56-62 kWh (kilowatt-hours) of electricity per day, on average, assuming around 4-5 hours of peak sunlight hours. This can add up to around 20,160-22,620 kWh per year. It's important to note that this is only an estimate and the actual output can vary based on several factors.
The amount of electricity produced by a 10 kW solar system can vary depending on several factors, such as the location, weather conditions, and the efficiency of the solar panels. On average, a 10 kW solar system can produce around 20-36 kWh (kilowatt-hours) of electricity per day, assuming around 4-5 hours of peak sunlight hours. However, the actual output can vary based on several factors, such as the orientation and tilt of the solar panels, shading, and weather conditions.
Save money - with manufacturer direct pricing
Save time - with experienced team to get project done
Lead the industry - with the most cutting-edge products